+98 (21)-33902094
|
|
The 370/400/800/1200/1600i/3200i/3600XRi analogue DC Drives provide a huge variety of design options, from low cost non-isolated 1Q drives through to 4Q fast-response speed & torque control drives. Now with cover and additional signal terminals to the top edge [1600i / 3200i / 3600XRi models only].
The Open Chassis-Mount DC Drives provide a more advanced 1Q option for motors rated up to 3.7/4/8/12/16/32/48A output current (0.55 up to 11kW motor power). The 370, 400, 400i, 800, 1200, 1600i Open Chassis-Mount DC Drives are available with 110-240VAC input as standard (3200i has 240-415VAC input as standard) and a 30-60VAC low voltage option providing 24 – 48VDC output. All models except the 370 feature the Sprint micro analog processor which provides many user benefits normally only seen in expensive “high end” products. The Sprint micro analog processor allows for cost saving solutions by meeting the users exact requirements and enhancing process performance.
The Open Chassis-Mount 3600XRi DC Drive is designed to meet the most demanding of process line applications. The advanced 4Q regenerative drive allows motoring and braking in both directions of rotation. Sprint Electric 3600XRi DC Drive provides an option for motors rated up to 36A output current (9.5kW motor power). The 3600XRi is available with 110-240VAC (1ph) and 240 – 415VAC (2ph) inputs across the range and both low voltage input options of 30-60VAC and 24-48VAC providing 18 – 48VDC output. Now with cover and additional signal terminals to the top edge.
For DC motors rated up to 3.7 Amps Integral AC supply fuse
Selectable dual international voltage supply
110/240V AC 50/60HZ
Adjustable current overload protection
Tachogenerator or armature voltage speed feedback
Adjustable acceleration rate between 1 and 20 seconds
Remote stop/start signal input facility
Adjustable IR compensation for improved AVF speed regulation
Sophisticated dual loop control
Infinitely variable
speed adjustment via remote potentiometer
Electronic soft start
Drive run input
Suitable for permanent magnet, shunt wound or
universal motors
Compact footprint
For DC motors rated up to 4 Amps Single Quadrant operation
400 has Non Isolated control electronics for single shaft applications
400i has Fully Isolated control electronics for interfacing with other systems
Extra 50% peak torque for rapid acceleration or shock loads
Torque control input for basic winding or tension control, with overspeed limiting
Ultra stable potentiometer reference for optimum long term speed and torque stability
Compact size
International dual voltage supply compatability (100-130VAC and 200-264VAC)
Integral AC supply fuse
Output signals for easy display of motor speed and load
Switch selectable feedback calibration – no component changes
component changes
Precision tach rectifier
Zero speed signal output
Motor overload output
Output signals for easy display of motor speed and load
Zero speed signal output
Switch selectable feedback calibration – no component changes
Adjustable IR compensation for improved AVF speed regulation
Adjustable stability control for optimum motor response
Easily interfaced with armature reversing module
800 controller for DC motors rated up to 8 Amps
1200 controller for DC motors rated up to 12 Amps
International dual voltage supply compatibility (100-130VAC and 200-264VAC)
130VAC and 200-264VAC)
Single Quadrant operation
Extra 50% peak torque for rapid acceleration or shock loads
User adjustable:
– Acceleration
– Deceleration
– Max motor speed
– Min motor speed
– IR comp
– Stability
– Max motor current
Torque control input for basic winding or tension
control, with overspeed limiting
Many additional input and output signals
Switch selectable Tach or armature voltage feedback
4-20mA and 0-20mA loop input option as standard
Easily interfaced with armature reversing module
Adjustable Stability control for optimum motor response
Integral AC supply fuse
Ultra stable potentiometer reference for optimum
long term speed and torque stability
Output signals for easy display of motor speed and load
Zero reference interlock facility
Adjustable IR compensation for improved AVF speed regulation
Switch selectable feedback calibration – no component changes
Precision tach rectifier
Zero speed signal output
Motor overload output
Identical footprint for 8 or 12 Amp output
Remote stop/start input
Features Sprint Electric micro analog processor
< p>Pushbutton input for electronic control of motor stop/startCompact size, saves panel space and makes for easy retrofitting
1600i For DC motors up to 16 Amps
3200i for DC motors up to 48 Amps
Fully isolated control electronics
Numerous inputs and outputs for complex system applications
Extra 50% peak torque for rapid acceleration or shock loads
User adjustable:
– Acceleration
– Deceleration
– Max motor speed
– Min motor speed
– IR comp
– Stability
– Max motor current
Switch selectable power up inhibit
Switch selectable feedback calibration – no component changes
Switched maximum current ranges for easy matching to motor current rating
Switch selectable drive relay functions
Ultra stable potentiometer reference for optimum long term speed and torque stability
Adjustable Stability control for optimum motor response
Switch selectable Tach or armature voltage feedback
Torque control input for basic winding or tension control, with overspeed limiting
(1600i 100-130VAC and 200-264VAC, 3200i (200-264VAC and 360-440VAC)
Direction control by switch or centre zero pot
4-20mA and 0-20mA loop input option as standard
Output signals for easy display of motor speed and load
Compact size, saves panel space and makes for easy retrofitting
Zero reference interlock facility
Single Quadrant operation
Adjustable IR compensation for improved AVF speed regulation
Precision tach rectifier
Now with cover and additional signal terminals to the top edge
Four Quadrant forward, reverse and braking operation
Five current outputs
– 4 Amp – 8 Amp – 16 Amp – 32 Amp – 36 Amp
Extra 50% peak torque for rapid acceleration or shock load
Fully regenerative – no braking energy dissipated as waste heat
Isolated control electronics for easy connection to other drives/equipment
Extremely compact size, saves panel space and makes for easy retrofitting
User adjustable presets for:
– Forward acceleration – Reverse acceleration
– Forward deceleration – Reverse deceleration
– Max motor speed
– Min motor speed
– Motor current limit
– Brake current limit
– Forward current limit – Reverse current limit
– Positive current limit- Negative current limit
– IR comp
– Stability
4Q torque input
direction and jog functions
Features Sprint Electric micro analog processor
Direct pushbutton inputs for control of stop/start,
Includes all the features of 1600i and 3200i
Relay output indicates motor load > 105%
Dual setpoint facility for alternate speed e.g. run and
crawl toggled speed reference ideal for easy end of travel reversal
Switch selectable Tach or Armature voltage feedback
Switched maximum current ranges for easy matching to motor current rating
Ultra stable potentiometer reference for optimum
long term speed and torque stability
International dual voltage supply compatibility
Fast response 4Q DC Drive for driving small low voltage brushed motors. Output current up to 12A. Up to 48VDC input voltage.
Fast response 4Q DC Drive for driving small low voltage brushed motors. Output current up to 2A. Up to 48VDC input voltage.
Fast response 4Q DC Drive for driving small low voltage brushed motors. Output current up to 4A. Up to 48VDC input voltage.
Fast response 4Q DC Drive for driving small low voltage brushed motors. Output current up to 8A. Up to 48VDC input voltage.