header

Position displays for SSI absolute encoders and absolute measuring systems

With the position displays, motrona offers another variant of its display devices. In conjunction with absolute value encoders, absolute measuring systems or magnetic sensors, the motrona position displays offer a cost-efficient solution for displaying, recording, calculating or controlling quantities such as lengths, times or quantities in automation and device technology - and with all the advantages of the motrona quality display devices .

DP350: touchMATRIX® display for transsonar displacement measurement

The DP350 of the touchMATRIX® series is suitable for absolute displacement transducers and magnetostrictive sensors. Due to its start-stop interface, the device is suitable for transsonar displacement measurement. Furthermore, the device has a resistive touchscreen with a multicolored graphic display (red, green, yellow).

-Start-stop interface for absolute displacement transducers and magnetostrictive sensors
-Adjustable frequency of the init pulses from 62.5 Hz to 5 kHz
-3 control inputs for HTL / PNP signals

IX350: touchMATRIX® SSI display for absolute encoders

Position indicator with resistive touchscreen and multicolor graphic display (red, green, yellow).

-SSI input in the format DATA+, DATA-, CLOCK+, CLOCK-
-SSI clock frequency up to 1 MHz
-Operating modes as master or slave
-For single or multiturn encoders with 10 ... 32 bits

IX350 options: for touchMATRIX® SSI displays

Individual configuration of the touchMATRIX® position displays with various options possible.

-Option AC: Power supply with 115 ... 230 VAC
-Option AO: 16-bit analogue output, 4 control outputs, RS232 interface
-Option AR: 16-bit analogue output, 4 control outputs, RS485 interface
-Option CO: 4 control outputs, RS232 interface
-Option CR: 4 control outputs, R485 interface
-Option RL: 2 relay outputs

IX355: touchMATRIX® SSI display for absolute encoders

"High-End" variant with open-circuit monitoring of the SSI data line (except SSI clock). Switchable encoder supply from 5 / 24 VDC. Can only be used as an SSI master. All other functions as IX350.

IX355 options: for touchMATRIX® SSI displays

Individual configuration of the touchMATRIX® position displays with various options possible.

-Option AC: Power supply with 115 ... 230 VAC
-Option AO: 16-bit analogue output, 4 control outputs, RS232 interface
-Option AR: 16-bit analogue output, 4 control outputs, RS485 interface
-Option CO: 4 control outputs, RS232 interface
-Option CR: 4 control outputs, R485 interface
-Option RL: 2 relay outputs
" More information

ID330: Dual SSI display 8 digits

The dual position display (incremental and SSI, absolute) offers a variety of special functions that are unique to incremental or SSI counters. The combination of two different measuring systems or sensors enables e.g. B. the evaluation of differences or sums or the linking of measured values ​​of an incremental encoder with the measured values ​​of an SSI absolute encoder.

-2 encoder inputs in the format DATA+, DATA-, CLOCK+, CLOCK- [SSI, absolute]
or A, /A, B, /B [RS422, incremental]
-4 control inputs for PNP / NPN / Namur signals [10 ... 30 VDC]
-Input frequency up to 1MHz
-4 fast transistor outputs, push-pull, short-circuit proof [5 ... 30 VDC]
-Power supply 24 VAC and 17 ... 40 VDC

ID340: Dual SSI display 6 digits

Functional scope as ID330, but with 6-digit, 15 mm high LED display.

IA330: Dual 8-digit SSI display with analog output

Scope of functions as ID330, but with scalable 14-bit analogue output.

IA340: Dual SSI display 6 digits with analogue output

Functional scope as IA330, but with 6-digit and 15 mm high display.

ID630: Dual SSI display 8 digits with 4 output relays (96 x 96 mm)

Scope of functions as ID330, but with 4 relays and design with the front dimensions 96 x 96 x 140 mm.

ID632: Dual 8-digit SSI display with 4 output relays and 2 preselector switches on the front

Scope of functions as ID630, but additionally with 2 preselections on the front for the switching function.

ID634: Dual 8-digit SSI display with 4 output relays and 4 preselector switches on the front

Scope of functions as ID630, but with 4 additional preselection switches on the front.

ID640: Dual SSI display 6 digits with 4 output relays (96 x 96 mm)

Functional scope as ID630, but with 6-digit, 15 mm high LED display.

ID642: Dual SSI display, 6 digits, with 4 output relays and 2 preselector
switches on the front

Scope of functions as ID640, but additionally with 2 preselections on the front for the switching function.

ID644: Dual SSI display, 6 digits, with 4 output relays and 4 preselector
switches on the front

Scope of functions as ID640, but additionally with 4 preselections on the front for the switching function.

IA630: Dual 8-digit SSI display with 4 relays and analogue output (96 x 96 mm)

Scope of functions as ID630, but with an additional scalable 14-bit analog output.

IA632: Dual 8-digit SSI display with 4 relays, analog output and 2 preselector
switches on the front

Scope of functions as IA630, but additionally with 2 preselections on the front for the switching function.

IA634: Dual 8-digit SSI display with 4 relays, analogue output and 4 preselector switches
on the front

Scope of functions as IA630, but additionally with 4 preselections on the front for the switching function.

IA640: Dual SSI display, 6 digits, with 4 relays and analogue output

Functional scope as IA630, but with 6-digit and 15 mm high display.

IA642: Dual SSI display, 6 digits, with 4 relays, analog output and 2 preselector
switches on the front

Scope of functions as IA640, but additionally with 2 preselections on the front for the switching function.

IA644: Dual SSI display, 6 digits, with 4 relays, analog output and 4 preselector
switches on the front

on the front Scope of functions as IA640, but additionally with 4 preselections on the front for the switching function.

Document